Video Overview: Important note: Arduino Pro Mini 3.3V was used for this Demo which makes it easier to interface with the LCD. If you're using a 5V Arduino, make sure to follow the guide below. Sketch and Guide: https://learn.sparkfun.com/tutorials/graphic-lcd-hookup-guide#example-code-2-drawing-bitmaps Wiring: DIG LINES: RST (any digital pin) CE (any digital pin) DC (any digital pin) SPI LINES: DIN - MOSI Pin 11 (S)CLK - Pin 13 Power Lines: VCC 3.3V recommended GND Back-light (Recommend 5V for blue LEDs, or any PWM/Digial Pin to control brightness) Product Page: www.aliexpress.com/item/1pcs-New-84-48-84x84-LCD-Module-White-backlight-adapter-PCB-for-Nokia-5110-for-Arduino/1898293552.html Note: I would recommend the LCD with a White back-light as opposed to the blue one. The product page above leads to the blue backlight version.
Rants and reviews about Electronics, Arduinos and whatever